Spiral Pointed Taps with straight shank
Spiral Pointed Taps with straight shank
Conform to GB/T3464.1-94, equal to ISO0527-1975
M2 HSS
M35 HSS-E, Coatings, available for speecified requirements
For machine
For through holes
Good cutting action, high speeding
| Metric | Pitch (mm) | Overall Length (mm) | Thread Length (mm) |
| M3 | 0.5 | 48 | 11 |
| M4 | 0.7 | 53 | 13 |
| M5 | 0.8 | 58 | 16 |
| M6 | 1.0 | 66 | 19 |
| M6X0.75 | 0.75 | 66 | 19 |
| M8 | 1.25 | 72 | 22 |
| M8X1.0 | 1.0 | 72 | 22 |
| M10 | 1.5 | 80 | 24 |
| M10X1.25 | 1.25 | 80 | 24 |
| M10X1.0 | 1.0 | 80 | 24 |
| M12 | 1.75 | 89 | 29 |
| M12X1.5 | 1.5 | 89 | 29 |
| M12X1.0 | 1.0 | 89 | 29 |
| M14 | 2.0 | 95 | 30 |
| M14X1.5 | 1.5 | 95 | 30 |
| M14X1.0 | 1.0 | 87 | 22 |
| M16 | 2.0 | 102 | 32 |
| M16X1.5 | 1.5 | 102 | 32 |
| M16X1.0 | 1.0 | 92 | 22 |
| M18 | 2.5 | 112 | 37 |
| M18X1.5 | 1.5 | 112 | 37 |
| M18X1.0 | 1.0 | 97 | 22 |
| M20 | 2.5 | 112 | 37 |
| M20X2.0 | 2.0 | 112 | 37 |
| M20X1.5 | 1.5 | 112 | 37 |
| M20X1.0 | 1.0 | 102 | 22 |
| M22 | 2.5 | 118 | 38 |
| M22X2.0 | 2.0 | 118 | 38 |
| M22X1.5 | 1.5 | 118 | 38 |
| M22X1.0 | 1.0 | 109 | 24 |
| M24 | 3.0 | 130 | 45 |
| M24X2.0 | 2.0 | 130 | 45 |
| M24X1.5 | 1.5 | 130 | 45 |
| M24X1.0 | 1.0 | 114 | 24 |
